SRB Tubes for Shock Absorbers: The Customer Who Came Back
An Australian parts maker needed high-precision SRB tubes for vehicle shock absorbers. The cheaper sample failed — they came back, tested ours, and ordered.

The customer
A manufacturer in Australia supplying the defence, autonomous driving, mining and automotive industries needed SRB precision tubes for automotive shock absorbers in high-performance and special vehicles. The inquiry specified E355, stress-relief annealed (+SR), bore tolerance H8, to EN 10305-1 and EN 10305-2. What mattered most to the customer was dimensions, precision, and consistency of material performance from batch to batch.
The part
The tube is an SRB (skived and roller burnished) precision tube: the bore is skived and then roller burnished to a smooth, accurate finish, so it can work as a shock absorber body. This order was for E355, stress-relief annealed, with the bore held to the customer's H8 requirement.
The challenge
The precision requirements were demanding, and the order started with a small sample quantity. Two things had to be settled: the exact precision standard, and the sample price — the customer found it hard to accept the difference between the sample price and the formal order price.
What we did
We went through several rounds of discussion, changing the plan and the drawings more than once, and adjusted the process until it met the requirements. Every tube was checked with dedicated gauges — 100% inspection — and we signed a quality assurance agreement with the customer.


The turning point
The customer could not accept the sample price and placed the sample order with another Chinese supplier instead. Two months later the other supplier's samples arrived — the quality was far below what the customer required. The customer came back to us. We made samples for the customer to test, and the test results were very satisfactory. The customer then placed the first formal order.
Send us your drawing
If your precision requirements look demanding, send us your drawing. We will confirm the standard, adjust the process where needed, and check every piece with dedicated gauges before shipment — with a quality agreement on request. Email your drawing (STEP / IGES / DXF / PDF) to bkmetal9@gmail.com, or start with the inquiry form and mention it in your message.



